
R-SY-17144
Automatic Micro Carbon Residue Tester
Determination of the amount of carbon residue formed after evaporation and pyrolysis of petroleum materials under certain conditions and is intended to provide some indication of the relative coke forming tendency of such materials. It is applicable to petroleum products that partially decompose on distillation at atmospheric pressure and was tested for carbon residue values of 0.10 % to 30 % (m/m). And also to petroleum products consist of distillate with carbon residue below 0.10 weight %.
- Product Model:
- R-SY-17144
- Design Standard:
- ASTM D4530
Description
Application:
Automatic Carbon Residue Tester (Micro Method) is applicable for the determination of the amount of carbon residue formed after evaporation and pyrolysis of petroleum materials under certain conditions and is intended to provide some indication of the relative coke forming tendency of such materials. It is applicable to petroleum products that partially decompose on distillation at atmospheric pressure and was tested for carbon residue values of 0.10 % to 30 % (m/m). And also to petroleum products consist of distillate with carbon residue below 0.10 weight %.
Test Standard:
ASTM D4530
Specification:
|
Nitrogen flow rate |
150mL/min, 600mL/min (auto-switch) |
|
Temperature control point |
500℃±1℃ |
|
Work pressure |
0.15Mpa |
|
Heating power |
1000W |
|
Control & display |
LCD touch screen |
|
Sample numbers |
12 |
|
|
Built-in printer |
|
Data storage |
Automatic |
|
Power |
1-PH, 220V, 50Hz |
