R-SY-260B
Water Content Tester
Determination of water in the range from 0 to 25 % volume in petroleum products, tars, and other bituminous materials by the distillation method. The material to be tested is heated under reflux with a water-immiscible solvent, which co-distills with the water in the sample. Condensed solvent and water are continuously separated in a trap, the water settling in the graduated section of the trap and the solvent returning to the still. The amount of water as determined by this test method (to the nearest 0.05 or 0.1 volume %, depending on the trap size used) may be used to correct the volume involved in the custody transfer of petroleum products and bituminous materials. The allowable amount of water may be specified in contracts.
- Product Model
- R-SY-260B
- Design Standard
- ASTM D95
Description
Application:
Petroleum Products Water Content Tester is suitable for the determination of water in the range from 0 to 25 % volume in petroleum products, tars, and other bituminous materials by the distillation method. The material to be tested is heated under reflux with a water-immiscible solvent, which co-distills with the water in the sample. Condensed solvent and water are continuously separated in a trap, the water settling in the graduated section of the trap and the solvent returning to the still. The amount of water as determined by this test method (to the nearest 0.05 or 0.1 volume %, depending on the trap size used) may be used to correct the volume involved in the custody transfer of petroleum products and bituminous materials. The allowable amount of water may be specified in contracts.
Test Standard:
ASTM D95
Specification:
|
Round bottom flask |
500ml |
|
Receiver |
10ml |
|
Condenser |
300mm long |
|
Heating power |
0-1000W adjustable |
|
Power |
1-PH, 220V, 50Hz |